Filter
Top Products
Current status
of tape
Time
Counter
and
Counter
Memory
Tape
Speed
STOP 12:00 AM
TV STEREO CH10
STEREO
2ND AUD
SLP M 1:23:45 HIFI
Channel
SELECT op CHOOSE B
→STATUS [ON]
COUNTER ONLY [OFF]
TO END PUSH EXIT
On-Screen Status Displays (VCR) 23
• You may not access a status display
when viewing a still picture, during
slow motion playback, or during for-
ward or reverse searching.
• The status display may not appear
if a weak channel is selected and
BLUE BACKGROUND is set to OFF.
Details are on page 49.
Helpful Hints
1
Press the MENU button.
A status display will appear when you press the
DISPLAY/STATUS/EXIT button or certain function buttons. The
contents of the status display will vary. To choose the status display
mode, follow the steps below.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press the VCR/TV button so that
the VCR/TV light appears on the front of the DVD/VCR.
If you select STATUS ON, then select COUNTER ONLY
ON:
● Whenever you press the STOP button or the PLAY button, the
status display will appear for five seconds. After five seconds, only
the counter will remain on the screen. You must press the DIS-
PLAY/STATUS/EXIT button to remove it. Portions of the status
display also may appear when you press other function buttons.
If you select STATUS ON, then select COUNTER ONLY
OFF:
● Whenever you press the STOP button or the PLAY button, the
status display will appear for five seconds. Portions of the status
display also may appear when you press other function buttons.
If you select STATUS OFF:
● The status display will not appear when you press function but-
tons. You must press the DISPLAY/STATUS/EXIT button to see
the status display.
2
Press the PLAY button or the STOP button to select VCR
SET UP, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select ON
SCREEN MODE, then press the F.FWD button.
5
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the PLAY button or the STOP button to
select COUNTER ONLY, then press the F.FWD button so
that OFF (or ON) appears beside it.
6
Press the DISPLAY/STATUS/EXIT button.
4
Press the PLAY button or the STOP button to select STA-
TUS, then press the F.FWD button so that OFF (or ON)
appears beside STATUS.
MTS
Broadcast
Available
Receiving and Recording Mode
Audio Out Mode