Filter
Top Products
R
E
C
O
R
D
123
546
789
0
DVD/VCR
OUTPUT
MEMORY
TIMER SET
DISPLAY
+10
SPEED
SETUP
TITLE
MENU
MODE
AUDIO
ANGLE
SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR
DVD
RETURN
CLEAR
C
H
A
N
N
E
L
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
SK
IP
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
SELECT PROGRAM NUMBER
TO END PUSH EXIT
36 Timer Recording
Follow the steps below to program your DVD/VCR to record TV
programs while you’re away from home. The DVD/VCR will turn
itself on, record, and turn itself off automatically. Before you begin:
● Set up the TV channels at the DVD/VCR.Details are on page 17.
● Set the clock. If the clock is not set, CLOCK MUST BE SET will
appear on the TV screen briefly, followed by the VCR menu.
Follow the directions on page 20 to set the VCR’s clock.
● Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).
● Press the DVD/VCR OUTPUT button so that the VCR light
appears on the front of the DVD/VCR.
● Press the VCR/TV button so that the VCR/TV light appears on
the front of the DVD/VCR.
Do each step within 60 seconds of the previous step.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
PROGRAM, then press the F.FWD button.
SELECT op CHOOSE B
→ONCE
DAILY
WEEKLY
PROGRAM REVIEW
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select a
ONCE, DAILY, or WEEKLY recording. Then, press the
F.FWD button.
● ONCE: The DVD/VCR will record a TV program on any day
you choose, up to 12 months away.
● DAILY: The DVD/VCR will record the same channel every day
from Monday to Friday – starting at the same time and recording
for the same length of time.
● WEEKLY: The DVD/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
Daily
Recording
(example)
• If you need to make a correction
while programming a timer record-
ing, press the CLEAR button until
the cursor is flashing on the item
you want to change. Then enter
the correct information.
Helpful Hint
1
2-3
VCR
1