Filter
Top Products
R
E
C
O
R
D
123
546
789
0
DVD/VCR
OUTPUT
MEMORY
TIMER SET
DISPLAY
+10
SPEED
SETUP
TITLE
MENU
MODE
AUDIO
ANGLE
SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR
DVD
RETURN
CLEAR
CHANNEL
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
SKIP
30 Remote Control Buttons (cont’d)
PAUSE Button
DVD mode ●
Press to pause Disc playback. Details are on page 52. Press repeatedly
to advance the DVD picture step by step (or one frame at a time).
Details are on page 53.
VCR mode
●
While recording, press to temporarily stop the recording (pause).
Press a second time to resume normal recording. Details are on page
33. You can not pause a One-Touch Recording. Or, press during tape
playback to freeze the picture. Press again to resume playback.
Details are on page 44.
Number Buttons
DVD mode ●
Press to directly select a Track (Audio CD) or a Chapter or Title
(DVD) for playback. Details are on pages 55-56.
Press to program Tracks (Audio CD) for playback. Details are on page 60.
VCR mode
●
Use to set up VCR features (such as the clock). Press to select TV channels
at the DVD/VCR. Cable Users: Enter channel numbers as a two-digit
number for the quickest results. For example, to select channel 6, press 0,6.
If you only press the Number 6 button, channel 6 will be selected after a
brief delay. (There also may be a brief delay when you select channels 10,
11, and 12.) If you want to select channels 100 and above, enter channel
numbers as a three-digit number. For example, to select channel 117, press
number buttons 1, 1, 7. Antenna Users: Enter channel numbers as a two-
digit number for the quickest results. For example, to select channel 5, press
0,5. If you only press the Number 5 button, channel 5 will be selected after
a brief delay. You may only select channels 2-69.
SKIP/CHANNEL Buttons
DVD mode ●
Press to skip Chapters or Tracks. Details are on page 55.
VCR mode
●
Press to change channels at the DVD/VCR.
DISPLAY/STATUS/EXIT Button
DVD mode ●
Press to display information about the disc. Details are on page 65.
VCR mode
●
Press to access or remove the VCR’s on-screen status display. Details
are on page 23. Press to exit on-screen VCR menus.
MODE Button
Press to set up programmed or random playback for an Audio CD.
Details are on pages 60-61.
CLEAR Button
DVD mode ●
Press to remove Track numbers from a Program. Details are on page 60.
VCR mode
●
Press to erase incorrect data when programming VCR functions.
Also, press to reset the real-time counter. Details are on page 42.
SLOW Button
During tape playback, press to view the picture in slow motion.
Press again to resume normal playback. Details are on page 44.
• To use the remote control to operate the DVD player and its features, press the DVD button on the remote control
before pressing other DVD buttons. DVD operation buttons are labelled in blue or white. Make sure the DVD/VCR is in
DVD mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the DVD/VCR.
• To use the remote control to operate the VCR and its features, press the VCR button on the remote control before
pressing other VCR buttons. VCR operation buttons are labelled in orange or white. Make sure the DVD/VCR is in VCR
mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the DVD/VCR.
Helpful Hints