Filter
Top Products
19
DVD736K IFU for /751 3141 016 19191
Test tone
This item is used to check the connection of the
audio system. When TEST TONE is ON, a fizzy
sound from every speakers will appear.
1 Press the 34 keys to highlight the TEST TONE
item.
2 Press OK to open its submenu.
3 Enter its submenu by pressing the 2 key.
4 Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ON: Enable test tone.
➜ OFF: Disable test tone.
5 Press OK.
6 Press the 1 key and return to the SPEAKER
SETUP menu.
Pro Logic setup
This item is used for settings on Dolby Pro Logic
signals.
1 Press SYSTEM MENU to enter the SETUP menu.
2 Press the 34 keys to choose
the PRO LOGIC SETUP menu.
3 Press OK to enter.
4 Press the 34 keys to highlight the PRO LOGIC
item.
5 Press OK to open its submenu.
6 Enter its submenu by pressing the 2 key.
7 Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ON: Output the Dolby Pro Logic signals.
➜ OFF: Forbid the Dolby Pro Logic signals to
send output.
➜ AUTO: Whether PRO
LOGIC is ON or OFF, it
depends on the audio format of
the disc you playback.
8 Press OK.
9 Press the 1 key and return to the SPEAKER
SETUP menu.
10 Press the 34 keys to highlight the MAIN PAGE
and confirm by pressing OK.
SPDIF setup
In this menu, you can set up digital audio format
outputing from coaxial and
optical terminals.
1 Press SYSTEM MENU to enter
the SETUP menu.
2 Press the 34 keys to choose the SPDIF SETUP
menu.
3 Press OK.
NOTE:
SPDIF is the abbreviation of Sony Philips Digital
Interface which is a protocol of digital data
transfering.
SPDIF OUT setup
1 Press the 34 keys to highlight the SPDIF OUT
item.
2 Press OK to open its submenu.
3 Enter its submenu by pressing
the 2 key.
4 Press the 34 keys to highlight
the selected item.
➜ RAW: Original digital signals output.
➜ PCM: Convert to PCM signals to output.
5 Press OK.
6 Press the 1 key and return to the SPDIF SETUP
menu.
LPCM 96K mode
In this menu, you can set up sampling rate to
decode LPCM audio.
1 Press the 34 keys to highlight the LPCM 96K
item.
2 Press OK to open its submenu.
3 Enter its submenu by pressing
the 2 key.
4 Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ON: Detect the loading disc for appropriate
sampling rate.
➜ OFF: The decoding process is under the
sampling rate of 48KHz.
5 Press OK.
6 Press the 1 key to return to the SPDIF SETUP
menu.
Setup Menu
DVD 736K/691 English IFU 2001.1.31, 10:33 AM19
”«