Filter
Top Products
16
DVD736K IFU for /751 3141 016 19191
Basic operations
1 Press SYSTEM MENU in the
STOP mode to enter the Setup
Menu.
2 Press the OK key to open the
next level submenu or confirm your selection.
3
Press the 1 2 keys to enter the submenu or
return to the previous menu.
4 Press the 34 keys to highlight the desired
menu.
5 Press SYSTEM MENU to quit the setup menu.
➜ When you quit the setup menu, the settings
will be stored in the player’s memory even if the
player is switched to power off.
General setup menu
Some settings are needed in this menu. they are:
DISC LOCK, PROGRAM, OSD LANGUAGE
and SCREEN SAVER.
Follow the steps below:
1 Press the SYSTEM MENU key to enter the
setup menu.
2 Press the 34 keys to choose the GENERAL
SETUP menu.
3 Press the OK key to confirm selection.
Disc lock
When the disc is locked, the player will store its
typical code into the memory
for the future identification. For the next
playback, the DVD player will prompt to enter
the password.
1 Press the 34 keys to highlight
the DISC LOCK item in the
GENERAL SETUP menu.
2 Press the OK key.
3 Enter its submenu by pressing
the 2 key.
- LOCK: Lock the disc being played.
- UNLOCK: unlock the disc.
4 Press the 1 key to return to the GENERAL
SETUP menu.
NOTE:
1. When playback a locked disc, the DVD player
will prompt to enter your password or 3308
(default) password.
2. To change the password , refer to the option
PASSWORD in the PREFERENCES menu .
Program (not available for DVD discs)
1 To choose the PROGRAM item, press the 34
keys.
2 Press OK to open its submenu.
3
Press the 2 key to move the cursor to the field of
the submenu to choose the item ON.
➜ ON: Enter the PROGRAM
item.
4 Press OK to enter the program page.
Input your favorite track
1 Input valid track number by pressing the
numerical keys.
2 Press the 1 234 keys to move the cursor to the
next selected position.
3
Repeat the steps above to input another track
number until the whole program is completed.
Exclude a track
1 Press the 1 234 keys to move
the cursor to track you want to
exclude.
2 Input an invalid track number to
cancel this track.
Cancel all tracks
1 Press the 1 234 keys to move the cursor to the
CLEAR button.
2 Press OK, all tracks will be cancelled.
3
Now you can input your favorite tracks again.
Playback tracks
When programing is completed,
1 Press the 1 234 keys to move the cursor to the
PROG button.
2 Press OK.
➜ DVD player will playback the selected
program under the programed sequence.
Stop the program playback
At the PROGRAM page, When programing is
completed,
1 Press the 1 234 keys to move the cursor to the
QUIT button.
2 Press the OK key to quit this menu.
VFD Dim
This function is used to adjust the brightness of
VFD on the front panel.
1 Press the 34 keys to highlight VFD DIM in the
GENERAL SETUP menu.
2 Press OK.
3 Enter its submenu by pressing the 2 key.
Setup Menu
DVD 736K/691 English IFU 2001.1.31, 10:32 AM16
”«