Philips DVD 765K DVD Player User Manual


 
11
DVD616K IFU for /751 3141 016 18911
Slow Motion
DVD
1 To get slow motion effect during playback, press
3 or 4.
2 Press 3 or 4 again, you can get different playback
forward/backward speeds.
3 Press PLAY to return to the normal play back.
VCD
1 To get slow motion effect during playback, press
3.
2 Press 3 again, you can get different playback
forward speeds.
3 Press the PLAY key to return to the normal play
back.
NOTE:
- The SLOW BACKWARD function is not available
for the Super VCD/VCD/CD disc.
Audio control during playback
MUTE
DVD
VCD
CD
1 Press the MUTE key to disable the sound output.
2 Press the MUTE key again to remove the mute.
SURROUND SOUND
DVD
VCD
CD
The DVD player can reproduce virtual surround
sound effect.
1 Press the Display key on the remote control.
2 Press 1 2 to highlight option 3D
3 Press 3 4 to switch it on or off.
Operation
Repeat
DVD
Repeat chapter/title/disc
To repeat the current chapter, press REPEAT.
To repeat the current title, press REPEAT a
second time.
To exit Repeat mode, press REPEAT again.
VCD
CD
Repeat track/disc
To repeat the current track, press REPEAT.
To repeat the entire disc, press REPEAT a second
time.
To exit Repeat mode, press REPEAT again.
Repeat A-B
DVD
VCD
CD
DVD-Video Discs: repeat a sequence in a
title
Video and Audio CDs: repeat a sequence in a
track
1 Press REPEAT A-B at your chosen starting point.
2 Press REPEAT A-B again at your chosen end
point.
The repeat sequence begins.
3 To exit the sequence, press REPEAT A-B.
NOTE: Before select the surround sound effect,
you must set DOWNMIX at the mode of
STEREO, LT/RT or VSS( please refer to SPEAKER
SETUP PAGE in SETUP MENU).
5 Disc Resume
DVD
VCD
CD
This player can resume the playback of last 5
discs, which should be unload at stop mode.
1 Load one disc, which is one of last 5 discs.
2
Press PLAY when DVD player is recognizing the
disc. if the information of this disc has been stored
in the memory of DVD player, it will be played
back from the point you stopped last time.
Audio channel selection
VCD
CD
1 SVCD has two stereo audio channels which are
used for playing karaoke or the audio language
selection. ( for instance, you can choose one
channel for only the music background of the
song while you play the karaoke.)
2 Press the AUDIO key on the remote control to
select the audio channels you want.
3 VCD has only one stereo audio channel, you can
select mono left audio channel or mono right
audio channel by pressing the AUDIO key on the
remote control.
DVD 765K/751 English IFU 2002.3.20, 1:33 PM11
”«