Filter
Top Products
6
Playing a Disc
Basic functions
Before Play
- Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the cor
rect Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up:
If you want to select a language, press the π/† button, and then press the ENTER button. (This
screen will only appear when you plug in the player for the first time.)If the language for the startup
screen is not set, the set-tings may change whenever you turn the power on or off. Therefore, make
sure that you select the language you want to use.Once you select a menu language, you can
change it by pressing the ®|| button on the front panel of the unit for more than 5 seconds with no
disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset
your preferred language.
Skipping Tracks
During play, press the SKIP (|k or K|) button.
- When playing a DVD, if you press the SKIP (K|) button, it moves to the next chapter. If you
press the SKIP (|k) button, it moves to the beginning of the chapter. One more press makes it
move to the beginning of the previous chapter.
- When playing a VCD, if you press the SKIP (K|) button, it moves to the next track. If you press
the SKIP (|k) button, it moves to the beginning of the track. One more press makes it move to
the beginning of the previous track.
- If a track exceeds 15 minutes when playing a VCD and you press the K| button, it moves for-
ward 5 minutes. If you press the |k button, it moves to the beginning of the track. One more
press makes it move to the beginning of the previous track.
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
Searching through a Chapter or Track
During play, press the SEARCH (k or K) button on the remote control for more than 1 second.
Note
- The speed marked in this function may be different from the
actual playback speed.
- No sound is hearing during search mode (Except CD).
DVD
CD
VCD
2X, 4X, 8X, 16X, 32X
2X, 4X, 8X, 16X, 32X
4X, 8X
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD
1. Press the REPEAT button on the remote control. Repeat screen appears.
2. Press the REPEAT or π/† button to change playback mode. DVD repeats play by chapter or
title.
- Off.
- Title : repeats the title that is playing.
- Chapter : repeats the chapter that is playing.
- Repeat A-B
Using the Disc and Title Menu
During the playback of a DVD disc, press the DISC MENU/TITLE MENU button on the remote control.
Note
- Depending on a disc, the Disc Menu/Title Menu may not work.
- You can also use the Disc Menu, using the DISC MENU button on the remote control.
- Title Menu will only be displayed if there are at least two titles in the disc.
Using the Display Function
When Playing a DVD/VCD/MPEG4
1. During play, press the TOOLS button on the remote control.
2. Press the π/† buttons to select the desired item.
3. Press the √/® buttons to make the desired setup.
4. To make the screen disappear, press the TOOLS button again.
The functions when using the Display function are listed in the table below.
To access the desired title when there is more than one in the disc. For example, if there is
more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage.
Allows playback of the film from a desired time. You must enter the starting time as a reference. The time
search function does not operate on some discs.
Lets you select the soundtrack language for a film. A DVD disc can have up to eight different soundtracks.
Lets you select the subtitle language or, if you prefer, turn off subtitles. A DVD disc can have up to 32 differ-
ent sets of subtitles, each in a different language.
Lets you choose the EZ-View type
Select to activate the Zoom function.
Some DVDs have scenes that have been recorded at multiple angles. Use the Angle function to view a
scene at one of those angles.
E
Z