Filter
Top Products
English
30
Recording (continued)
{ Source }
– Use ST keys to select the recording input
source.
{ Rec Mode }
– Use ST keys to select your option.
See pages 26~27 on “Recording settings -
Default Recording Mode”).
{ Mode }
– Use ST keys to select { Once },
{ Daily }, { Weekly }, { Mon-Fri } (Monday
to Friday, ) { Mon-Sat } (Monday to Saturday)
or { Weekend } (Saturday and Sunday)
recordings.
{ Date }
– Use ST keys or the numeric keypad
0-9 to enter the date for recording.
{ Start }
– Use ST keys or the numeric keypad
0-9 to enter the start time of recording.
{ End }
– Use ST keys or the numeric keypad
0-9 to enter the end time of recording.
F Select
OK
in the menu and press OK.
The system will store the timer entry
and return to the timer schedule list.
To cancel the above timer setting, select
CANCEL
in the menu and press OK.
G Press TIMER to exit the menu.
H Insert a DVD±R/±RW into the DVD
recorder.
I Press STANDBY-ON to turn off the
DVD recorder.
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
If you ignore the warning message,
the DVD recorder will automatically
switch to standby mode to prepare for
timer recording at the designated time.
The ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
Helpful Hint:
– Set the timer recording one minute ahead
of the program’s start time. This helps to
ensure the entire program is recorded as
the disc requires about 30 seconds to
prepare for recording.
Setting a timer recording from
an external Cable Box/ Satellite
Receiver
If you have a Satellite Receiver/Cable Box
connected to this DVD recorder via the
S-VIDEO (Y/C) or VIDEO (CVBS) (see
page 13), follow the steps described
below to program the recordings.
A Select the channel you want to record at
the Satellite Receiver/Cable Box.
B Program the recording with the required
information. Follow the steps
A~I of
“Timer Recording (manually)” on pages
29~30.
{ Source }
– Use ST keys to select { Rear S-Video }
or { Rear CVBS } as the input channel and
press OK to con rm.
C Leave the Satellite Receiver/Cable Box on
for the recording.
TIPS: Ensure that there is suf cient space available on the DVD±R/±RW before recording.
You have to nalize the DVD±R, before it can be played on other players, see page 35.
dvdr3365_apac97_eng23.indd 30dvdr3365_apac97_eng23.indd 30 2005-11-02 10:45:03 AM2005-11-02 10:45:03 AM