Filter
Top Products
English
50
DVD System Menu Options (continued)
Progressive/ Interlace
Progressive scan delivers a higher picture
quality than the standard interlaced TV
channel scan. It only works when you
have connected the DVD recorder
Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise,
the image may not appear or will be
distorted. Please check your TV user
manual for more information.
A In ‘System Menu-General’, use ST keys
to select { Progressive / Interlaced }
and press OK.
{ Interlaced }
Select this to enable interlaced feature.
{ Progressive }
Select this to enable progressive scan feature.
B Use ST keys to select a setting and
press OK to con rm.
Helpful Hints:
– Follow the instructions shown on the TV to
con rm the selection (if any).
– If a blank/distorted TV screen appears,
wait for 10 seconds for the auto recovery.
Video Output Format
The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
A In ‘System Menu-General’, use ST keys
to select { Video Output Format } and
press OK.
{ NTSC }
Select this if the connected TV has the NTSC
colour system. It will change the video signal of
a PAL disc and output it to NTSC format.
{ PAL }
Select this if the connected TV has the PAL
colour system. It will change the video signal of
an NTSC disc and output it to PAL format.
B Use ST keys to select a setting and
press OK to con rm.
Helpful Hint:
– If a blank/distorted TV screen appears,
wait for 15 seconds for the auto recovery.
Restore Factory settings
This will restore all the settings of this
DVD Recorder, except for the PIN code.
Restore Factory settings can only be
changed when there is no disc in the
disc tray.
A In ‘System Menu-General’, use ST keys
to select { Restore Factory Settings }
and press OK.
A warning message will appear
B Select
OK
in the menu to proceed or
CANCEL
to abort, then press OK to
con rm.
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
dvdr3365_apac97_eng23.indd 50dvdr3365_apac97_eng23.indd 50 2005-11-02 10:45:06 AM2005-11-02 10:45:06 AM