Filter
Top Products
English
28 Timer Recording
STANDBY-ON
PLAY
DVD
VCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
8
9
0
+10
Follow the steps below to program the VCR of the DVD/VCR to
record TV programs while you’re away from home. Before you begin:
● Set up the TV channels at the DVD/VCR. Details are on page 21.
● Set the clock. Details are on page 22.
● Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).
● Press VCR so VCR light appears on the front of the DVD/VCR.
1
Press DISC/VCR MENU so MENU appears.
2
Press
K or L
to select TIMER PROGRAMMING.
Then, press
B
. Program numbers that do not have a timer
recording stored will flash.
3
Press K or L to select an empty program.
Then, press B.
4
Press K or L to select ONCE,DAILY, or WEEKLY.
Then, press B.
● ONCE - The VCR will record a TV program on any day you
choose, up to 12 months away.
● DAILY -
The VCR will record a TV program at the same time
on the same channel every day,Monday through Friday.
●
WEEKLY - The VCR will record a TV program at the same time
on the same channel every week, for example, every Monday.
5
To enter the recording date, press K or L until the
month appears.Then, press B.
Next, press K or L until the day appears.Then,
press B. The day of the week will appear. You cannot
record more than one year in advance.
6
To enter the recording’s start time, press K or L until the
hour appears. Press B.Press K or L until the minute
appears. Press B.Finally, press K or L to point to AM
or PM. AM or PM will flash beside the start time. Press B.
7
Repeat the procedure in step 6 to set the
recording’s end time.
8
Press K or L until the channel number appears.
Then, press B.
● If you are using a standard antenna/Cable TV hookup (as
shown on page 9), select the channel of the TV program
you want to record.
• You cannot access the TIMER
PROGRAMMING menu at step
2 if the clock is not set.The
CLOCK SET menu will appear.
Follow the steps on page 22 to
set the clock.
• Only programs that will air
Monday-Friday can be recorded
on a DAILY basis.If you select
DAILY at step 4,then enter a
Saturday or Sunday DATE at step
5, the correct program will not
be recorded.The VCR will alter
the recording date and record a
different program than the one
you intended.
• If you are recording from other
equipment, set CHANNEL to L1
or L2 at step 8. If you connected
the other equipment to the
AUDIO and VIDEO In jacks on
the front of the DVD/VCR,
choose L2. If you connected the
equipment to the AUDIO IN and
VIDEO IN jacks on the back of
the DVD/VCR, choose L1.
• Enter the information while the
space is flashing.
Helpful Hints
2- 8
1
PROG. 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED
TIMER PROGRAMMING
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Instructions continue on page 29.
H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 28