Filter
Top Products
English
Timer Recording (cont’d) 29
● If you are recording from other equipment, select L1 or
L2.To determine L1 or L2, refer to the Helpful Hints.
● If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver,select the
channel you want to record. Leave the Cable
Box/Satellite Receiver on for the timer recording.
Details are on page 10.
9
Press K or L to select a recording tape speed. The arrow
will appear beside your choice.The selected speed will flash
beside REC SPEED. Details about tape speed are on page 60.
•
To stop a started timer recording,
press STOP/EJECT C A (VCR) on
the front of the DVD/VCR. (You
cannot stop a started timer
recording with STOP C on the
remote.) More Helpful Hints are
on page 62.
• To change incorrect information,
press s or B to choose the
item you want to change. Press
K or L to adjust the
information.
• While a timer recording is set
and “ ” is on, pressing
STOP/EJECT C A (VCR) will
turn on the DVD/VCR and/or
cancel the timer recording.The
“”will disappear.Press
STOP/EJECT C A (VCR) again to
remove the tape. Insert a tape
and press TIMER SET to reset
the timer recording.
• If there is no tape in the VCR
when you press TIMER SET,
“”will flash. Insert a tape.
• If one or more Timer recordings
are on standby when one timer
recording ends,the DVD/VCR
will turn off automatically and
“”will appear on the
DVD/VCR's display panel
indicating that it is now ready for
another timer recording.
Helpful Hints
PROGRAM NUMBER 1
DATE 0 5 / 0 4 WED
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL 16
REC SPEED S P
B SP
SLP
ONE TIME PROGRAM
10
Press
CLEAR/RESET to store the timer recording.
11
Press TIMER SET. The DVD/VCR will turn off and “ ” will
appear in the display panel. In some cases, the DVD/VCR will
switch to DVD mode instead.You may use the DVD Player
during a timer recording.
If you want to use the VCR until time for the recording, don’t
press TIMER SET until a few minutes before the recording
should start. Or, press TIMER SET only when you know you
won’t be using the VCR anymore (until after the recording).
When “ ” appears, you cannot put the DVD/VCR in VCR
mode by pressing VCR or SOURCE.You must first press TIMER
SET to cancel the timer recording temporarily.Then, you can
use the VCR features again.
When a timer recording ends
The DVD/VCR will turn off and “ ” on the DVD/VCR's display panel
will flash indicating that the recording is complete. Or it may switch to
DVD mode automatically. Press TIMER SETto use the DVD/VCR as usual.
Cancelling Timer Recordings
1
PressVCR, then press DISC/VCR MENU so MENU
appears.
2
Press K or L to select TIMER PROGRAMMING,
then press B.
3
Press K or L to find the program you want to
cancel.
4
While the program number is flashing, press s to
clear all the information for that program.
5
Press CLEAR/RESET to remove the menu.
STANDBY-ON
PLAY
DVDVCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
8
9
0
+10
9
10
11
H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 29