Filter
Top Products
English
32 Time Search, Index Search
Time Search
Follow the steps below to search forward or backward on a tape
a specific length of time.There must be a tape in the cassette
compartment.
1
Press VCR, then press SEARCH until the TIME
SEARCH screen appears.
• Time Search and Index Search
are not available during
recording.
• To remove a Search display, press
CLEAR/RESET.
• To cancel a search, press
STOP C .
Helpful Hints
Index Search
An Index Mark is made automatically at the beginning of each
recording.Essentially, an Index Mark is a “bookmark.” Find the start
of a recording by following these steps.
1
Press VCR,then press SEARCH until the INDEX
SEARCH screen appears.
2
Within 30 seconds, press K or L until the number of
programs you want to skip appears beneath INDEX
SEARCH. Include the current program in your number.
3
Within 30 seconds, press s (for a reverse search) or B
(for a forward search). When the tape finishes rewinding or
forwarding, playback will start.The program numbers will
count down beneath INDEX SEARCH during the search.
If the end of the tape is reached during the search, the search
will stop and the tape may rewind. Details are on page 33.
Recordings should be at least 1 minute long in SP speed, 2
minutes in LP, and 3 minutes in SLP. Otherwise, the Index
Mark will not be available. Details on tape recording speeds are
on page 60.
STANDBY-ON
PLAY
DVDVCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
2-3
1
STANDBY-ON
PLAY
DVD
VCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
2-3
1
TIME SEARCH
- : - -
2
Within 30 seconds, press K or L until your desired
length of time appears. Or, press and hold K or L until
you reach the desired length of time.
You can set a Time Search for up to 9 hours and 59 minutes
(9:59).
3
Within 30 seconds, press s (for a reverse search) or B
(for a forward search). The VCR begins rewinding or fast
forwarding the tape.When the tape finishes rewinding or fast
forwarding the time you specified, playback will begin.
The time will count down beneath TIME SEARCH during the
search.
If the end of the tape is reached during the search, the search
will stop and the tape may rewind. Details are on page 33.
INDEX SEARCH
– –
H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 32