Filter
Top Products
7Use of the menus and the menu system
Use of the menus and the menu system
& Press the MENU key on the remote control to display/cancel the MAIN MENU.
é Use the cursor key in the up/down directions to select the menus.
“ Press the cursor right to access the menu.
‘ Use the cursor key in the up/down directions to select the menu items.
( In case of a slider, move the cursor left/right to adjust.
§ Press the MENU key repeatedly to return or to switch the menu off.
Note: Only when in the US English language has been selected (see
SET-UP menu,
LANGUAGE
, p. 10), the menu items will be displayed with additional icons.
Picture menu
Note:
If the message “
CAN NOT ADJUST” appears when trying to adjust the picture settings,
be sure the Picture mode is set to
MEMORY.
Contrast
This control allows you to adjust the contrast level of the picture.
Brightness
This control allows you to adjust the brightness level of the picture.
Sharpness
This control allows you to adjust the edge definition of a picture.
(Colour)
This control allows you to adjust the saturation level of the colours to suit your
personal preference.
(Tint)
This control allows you to compensate for the Colour variations in NTSC
encoded transmissions.
Picture mode
This control allows you to select a picture mode according to the brightness of
the environment in which you are viewing the pictures on the monitor display.
Press the cursor left/right to select
THEATRE in a dark room, NORMAL in a
bright room,
MEMORY to keep the picture adjustments you adjusted yourself,
RESET to reset the picture to the settings predefined in the factory.
Colour temperature
This control allows you to select the Colour temperature and the white balance
of the picture.
& Press the cursor left/right to select 1 (bluer), 2 (standard), 3 (redder) or
PRO (white balance).
é Select PRO to adjust the white balance for bright and dark pictures.
“ Press the OK key to display the WHITE BALANCE menu.
‘ Select and adjust Red-Green-Blue GAIN to adjust the white balance for signal
level.
Select and adjust Red-Green-Blue
BIAS to adjust the white balance for black
level.
(Noise reduction)
This control allows you to reduce the noise in the picture due to poor reception
or poor picture quality.
Select
OFF, NR-1, NR-2 or NR-3 according to the level of noise present.
Note: Select
RESET in the OPTION1 menu, p. 8, to restore the predefined factory PICTURE
settings.
CONTRAST
BRIGHTNESS
SHARPNESS
(COLOUR)
(TINT)
PICTURE MODE
COLOUR TEMP.
(NOISE RED.)
PICTURE
SCREEN
OPTIONS1
OPTIONS2
SET-UP
FREQUENCY
MAIN MENU
PICTURE
L M
J
SELECT
M
SELECT MENU OFF
J
SELECT
L M
ADJUST MENU RETURN
GAIN
RED
GREEN
BLUE
BIAS
RED
GREEN
BLUE
WHITE BALANCE
L M
J
SELECT
L M
ADJUST MENU RETURN
126 1022.4 gb 20-12-2002 11:54 Pagina 7