Filter
Top Products
8 Use of the menus and the menu system
Screen settings menu
In this menu you are allowed to adjust the position of the picture and to
correct the flickering of the picture menu items.
Note:
- The
AUTO PICTURE, FINE PICTURE and PICTURE ADJ. menu items are not available with
signals from a Video source.
- The menu items
FINE PICTURE and PICTURE ADJ. are available only when you select
AUTOPICTUREOFF
.
- Select
RESET in the OPTIONS1
menu to restore the predefined factory PICTURE
settings.
& Select MODE and press the cursor left/right to select a picture format
(
NORMAL or FULL in VGA-mode).
é Select AUTO PICTURE ON or OFF. When having selected ON,
the PICTURE ADJ. and FINE PICTURE adjustments are made automatically.
When having selected
OFF, the PICTURE ADJ. and FINE PICTURE
adjustments can be made manually.
FINE PICTURE adjusts for flickering; PICTURE ADJ. adjusts for striped
patterns on the picture.
“ Select V-POSITION, H-POSITION to adjust the position of the picture.
V-POSITION adjusts the vertical position,
H-POSITION adjusts the horizontal position,
Options 1 menu
OSD
Select
OFF if you do not want On screen information like input source, screen
mode, etc. to appear on screen during presentation, etc.
OSD ADJ.
Select
OSD ADJ. 1-9 to position the menus that appear on screen. The
position can be set between 1 and 9.
POWER MGT. (only in VGA mode)
Select
POWER MGT. ON to turn the power management function on.
The power management function is an energy-saving function and
automatically reduces the monitor’s power consumption if the computer’s
keyboard or mouse in not operated for a certain time. (See also the
computer’s operating instructions).
Note: if the computer’s power is not turned on, the power management function is set
to
OFF.
GRAY LEVEL
This control allows you to set the gray level for the sides of the screen when
a normal 4:3 picture mode is displayed. It adjusts the brightness of the black
for the sides of the screen.The standard is 0 (black) and the level can be
adjusted from 0 to 15.The predefined factory setting is 3 (dark gray).
CINEMA MODE
Select
CINEMA MODE ON to automatically discriminate and project the film
image in a cinema mode suited to the picture (NTSC, PAL60, 480I, (60Hz)
only).
MODE NORMAL
V-POSITION
H-POSITION
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
SCREEN
J
SELECT
L M
ADJUST MENU RETURN
OSD ON
OSD ADJ.
POWER MGT.
GRAY LEVEL
CINEMA MODE
DVI ADJ.
LONG LIFE
RESET
OPTIONS1
123
456
789
OSD ADJ.
J
SELECT
L M
ADJUST MENU RETURN
126 1022.4 gb 20-12-2002 11:54 Pagina 8