Philips HTP3120K/93 DVD Player User Manual


 
English
20
Starting disc playback
A Turn on the TV to the correct program
number for the DVD player (e.g. ‘EXT’,
‘0’, ‘AV’).
B Press
待机/开启
(STANDBY-ON) to
turn on the DVD player.
C Press 开/关仓 ç (OPEN/CLOSE) on the
front of the DVD player.
You can also hold down the 停止
(STOP) button on the remote control to
open and close the disc tray.
D Place a disc into the disc tray with the
label facing up, then press 开/关仓 ç
(OPEN/CLOSE).
For double-sided discs, load the side
which you want to play facing up.
E Playback may start automatically.
If not, press 播放/暂停 u ( PLAY/
PAUSE).
If a disc menu appears on the TV, see
page 21 'Using the Disc Menu'.
If the child lock was activated for the
inserted disc, you have to enter your six-
digit password (see page 37-38).
For more playback features, see pages
20~27.
Tips:
– Do not overturn the DVD player while disc
loading, playing or ejecting.
– Do not close the disc tray manually even if
the power switched off.
Playback Features
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
A
During playback, press 播放/暂停 u
( PLAY/PAUSE) to pause playback and
display a still picture.
Sound will be muted.
B To resume normal playback, press 播放/
暂停 u ( PLAY/PAUSE) again.
Selecting title/chapter/track
During playback, press PREV í to go
to the beginning of the currect chapter/
track, press PREV í again to go to the
previous title/chapter/track.
Press NEXT ë to go to the next
chapter/track.
Press 显示 (DISPLAY) to display the disc
information text line for title/chapter/
track (example - 00/08).
Use numeric keypad (0-9) to enter
valid title/chapter/track number.
The playback skips to the selected
title/chapter/track.
Stopping playback
Press 停止
(STOP).
Tips:
– Screen saver will start automatically if the
disc playback is stopped/paused for about 5
minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for about 15 minutes after the disc
has stopped playing.
01_dvp3120K_93_eng2.indd 2001_dvp3120K_93_eng2.indd 20 2007-06-25 11:15:05 AM2007-06-25 11:15:05 AM