Philips HTS3306/F7 Blu-ray Player User Manual


 
EN - 41
EN
6. Select “Subnet Mask”, “Default Gateway”, “Primary
DNS” and “Secondary DNS” in turn, and enter each
address number with cursor buttons and number
buttons, then press [OK].
Enter the DNS addresses provided by your Internet
provider.
If the DNS address is unknown, check the DNS
address of other devices (e.g. PC connected via LAN
cable) and assign the same DNS address.
7. Use [] to select “Done”, then press
[OK].
8. Use [] to select “Continue”, then press
[OK].
9. Use [] to select “Yes” or “No” for proxy server,
then press [OK].
If you use proxy server, select “Yes” to go to the
next step.
If you do not use proxy server, select “No” to go to
step 13.
10. “Proxy Address” setting screen will appear. Enter
proxy address with cursor buttons, number buttons
and color key.
11. Press [Red] to go to the “Proxy Port” setting screen.
Enter proxy port number with number buttons.
12. Use [] to select “Done”, then press
[OK].
13. Connection speed setting screen will appear. Use
[]
to select the desired setting, then press
[OK]
.
(The default setting is “Auto”.)
14. BD-Live™ setting screen will appear. Use [] to
select the desired setting, then press [OK].
(The default setting is “Allow”.)
“Allow”:
Internet access is permitted for all BD-Live™ contents.
“Limited Allow”:
Internet access is permitted only for BD-Live™
contents which have content owner certificates.
Internet access without the certificates is prohibited.
“Prohibit”:
Internet access is prohibited for all BD-Live™ contents.
15. Connection test confirmation screen will appear. Select
“Yes” to start the connection test and the test result
will appear right after the connection test finishes.
16. Press [OK] to go back to the setup menu, or press
[(home)] to exit.
D Note for “IP Address”, “Subnet Mask”,
“Default Gateway”, “Primary DNS” and
“Secondary DNS”
The range of input numbers is between 0 and 255.
If you enter a number larger than 255, the number will
automatically be reset to 255.
When you enter a wrong number, select “Clear” to
clear. (The number will be reset back to “0”.)
If you want to enter a 1 or 2-digit number in one cell,
press [] to move on to the next cell.
D Note for “Proxy Address” and “Proxy Port”
The range of input numbers for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
For proxy port, certain ports might be closed, blocked
or unusable depending on your network environment.
Choose a connection speed in accordance with your
network environment.
When the settings are changed, the network
connection may be disabled depending on the device.
[]: Move the highlight.
[the Number buttons] : Enter numbers or letters.
[OK] : Enter the highlighted number /
letter.
*[Red] : Set the entered number or letter.
[Green] : Cancel the network setting.
*[Blue] : Clear the entered number or
letter.
[Yellow] : Switch between abc, ABC and @!?.
* These buttons can be used in other network settings.
xxx. xxx. xxx. xxx
xxx. xxx. xxx. xxx
xxx. xxx. xxx. xxx
xxx. xxx. xxx. xxx
xxx. xxx. xxx. xxx
Please enter your
network settings.
Continue
Cancel
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
http://xxxxx.xx.xx
a/A/@
Proxy Address
Please input the Proxy Address with keypad or software keyboard.
Done Cancel Clear
xxxxxx
Proxy Port
Please input the Proxy Port.
Cancel Clear Done