Philips L06.1E AA CRT Television User Manual


 
Service Modes, Error Codes, and Fault Finding
EN 18 L06.1E5.
5.8.2 SAM Menu Structure
The SAM Menu structure of the L06.1E AA is different from that
of the ES1. Some of the menu items that were in the main
menu of the ES1 are now in the submenu. The following table
shows the structure of the SAM menu of the L06.1E AA.
Table 5-4 SAM menu structure
SAM Main Menu
SAM
Submenu
level 1
SAM Submenu
level 2
Example of
SAM
Submenu
values /
settings Explanation of menu items
Clear Yes Clear. Erases the contents of the error buffer. Select the CLEAR menu item and press the CURSOR RIGHT key. The
content of the error buffer is cleared.
Options OP1 Options. Used to set the option bits. See “Options” in the Alignments section for a detailed description.
OP2
OP3
OP4
OP5
OP6
OP7
Tuner IFPLL Tuner. Used to align the tuner. See “Tuner” in the Alignments section for a detailed description.
AGC
RGB Align AKB Off / On RGB Align > White Tone. Used to align the white tone. See “RGB Align > White Tone” in the Alignments section for a
detailed description.
White Tone Cool
Normal
Warm
BlackL Offset R
BlackL Offset G
CL 7
Geometry Horizontal HP 8 Geometry. Used to align the Geometry. See “Geometry” in the Alignments section for a detailed description.
HB 9
HSH 33
EWW 23
EWP 26
EWT 31
UCP 41
LCP 34
Vertical SBL Note: If the TV set is switched to 50 Hz/double lines (i.e. not Pixel Plus/100 Hz) only “VS” is shown in the menu.
VS 42
VSH 26
VAM 25
VSC 21
Audio AF-M 250 Audio. No audio alignment is necessary for this television set.
A2-T 400
AT 2
NVM Editor ADR 0x0001 1 NVM Editor. Can be used to change the NVM data in the television set.
VAL 0x0000 0
Store
Compair Compair ComPaIr. In other TV sets, this menu item can be used to switch the television to “In System Programming” (ISP) mode,
for software uploading via ComPair. In the L061E AA, however, a different system is used: IAP. Caution: When this
mode is selected without IAP connected, the TV will be blocked. Remove the AC power to reset the TV.
IAP IAP. This tool is used instead of Compair (Compair is not implemented in this TV set).