13
Note
Before pressing any function button on the
UHPRWHFRQWUROÀUVWVHOHFWWKHFRUUHFWVRXUFH
with the remote control instead of the main
unit.
If you are not going to use the remote control
for a long time, remove the battery.
Auto install radio stations
When you connect the unit to the power
VXSSO\IRUWKHÀUVWWLPHRUQRUDGLRVWDWLRQLV
stored in this unit, Plug and Play is activated to
store all available radio stations automatically.
1 Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY, STOP »
CANCEL] ((auto install - press the
PLAY button; to cancel, press
) is
displayed.
Press on the main unit to start
installation.
[AUTO] (auto) is displayed.»
The unit automatically store radio »
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
When all the available radio stations »
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ
is broadcast automatically.
6HWFORFN
1
In standy-by mode, press and hold
&/2&.',63/$< to activate the clock
setting mode.
The 12 hour or 24 hour format is »
displayed.
Press 352* repeatedly to select 12 hour
or 24 hour format.
3 Press &/2&.',63/$<WRFRQÀUP
The hour digits are displayed and begin »
to blink.
4 Press / to set the hour.
4 Get started
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
)RUÀUVWWLPHXVH
1 Remove the protective tab to activate the
remote control battery.
7RUHSODFHWKHUHPRWHFRQWUROEDWWHU\
1 Open the battery compartment.
Insert 1 CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
English
EN