Filter
Top Products
26
• [Auto] – Select audio output through
the HDMI connection automatically.
• [Off] – Disable HDMI audio output
(not recommended).
[HDMI SETUP] > [Resolution]
Select the HDMI video output resolution that is
compatible with your TV display capability.
Tip
This option is only available when the • [HDMI] option
is set to [Auto].
In the resolution options, “i” denotes interlace and “p”
•
denotes progressive.
Preference setup
On [Preference Page], you can set the following
options:
[TV Type]
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
• [PAL] - For TV with PAL color system.
• [Auto] - For TV that is compatible
with both PAL and NTSC.
• [NTSC] - For TV with NTSC color
system.
[Audio]
Select the preferred audio language for disc play.
[Subtitle]
Select the preferred subtitle language for disc
play.
[Disc Menu]
Select the preferred disc menu language.
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [On] – enjoy quiet viewing at night
(DVDs only).
• [Off] – enjoy surround sound with its
full dynamic range.
[Audio Sync]
Set the default delay time for audio output
when you play a video disc.
Press / to set the delay time.
Press OK /
to confi rm and exit.
Video setup
On [Video Setup Page], you can set the
following options:
[Component]
Set the video output according to the video
connection. If the composite connection is used,
this setting is not required.
• [S - Video] – If the S-Video
connection is used, select this option.
• [Pr/Cr Pb/Cb Y] – If the component
connection is used, select this option.
[TV Mode]
Select the video output mode. To select the
progressive scan mode, ensure that you have
connected a progressive scan TV and set
[Component] to [Pr/Cr Pb/Cb Y].
• [P - SCAN] – For progressive scan TV:
turn on the progressive scan mode.
• [Interlace] – For ordinary TV: turn on
the interlace mode.
[Quality] > [Picture Setting]
Customize picture color settings.
[HDMI SETUP] > [HDMI]
Turn on or off HDMI output.
EN