Philips MCD388 DVD Player User Manual


 
27
[Password Setup] > [Password Setup
Page] > [Password]
You can change password here. The
default password is 1234.
[Change]
1) Press the numeric keys to enter ‘1234’ or
your last set password at [Old Password] eld.
2) Enter the new password at [New
Password] eld.
3) Enter the new password again at [Confi rm
PWD] eld.
4) Press OK /
to exit the menu.
Note
If you forget the password, enter ‘1234’ before you set
a new password.
Note
If the language you have set is not available on the disc,
the disc uses its own default language.
For some discs, the subtitle/audio language can only be
changed from the disc menu.
[Parental]
Restricts access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
Press OK / .
Select a rating level, then press OK /
.
Press the numeric keys to enter the password.
Note
Rated discs above the level you set in [Parental]
require a password to be played.
The ratings are country-dependent. To allow all discs to
play, select [8 ADULT].
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
Tip
You can set or change the password .
[Default]
Resets all the settings of this unit to factory
default, except for the password and parental
settings.
[Password Setup] > [Password Setup Page] >
[Password Mode]
This setting allows you to enable/disable the
password for parental control. If the password
is enabled, when you play a prohibited disc, this
4-digit password is required.
[On] - Enable the password for
parental control.
[Off] - Disable the password for
parental control.
English
EN