Filter
Top Products
19
2 Press SYSTEM MENU to exit the menu.
3 Press DISC followed by numeric key “1” to
turn off the progressive scan mode on the
unit.
The blue Philips DVD background »
screen is displayed.
Note
In the progressive mode, if you press • DISC followed
by numeric key “1” during normal play, the progressive
scan mode will be turned off on the unit.
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
The TV supports progressive scan •
signals.
You have connected this unit with the •
TV through component video.
1 Turn on the TV.
2 Ensure that the TV progressive scan mode
is deactivated (see the TV user manual).
3 Switch the TV to the correct viewing
channel for this unit.
4 Press DISC .
5 Press SYSTEM MENU .
6 Press / to select [Video Setup Page]
in the menu, then press
.
7 Select [Component] > [Pr/Cr Pb/Cb Y] ,
then press OK /
.
8 Select [TV Mode] > [P - SCAN] , then
press OK /
.
A warning message is displayed. »
9 To proceed, select [OK] and press OK /
.
The progressive setup is complete. »
Note
If a blank/distorted screen is displayed, wait for 15 •
seconds for auto recovery or turn off progressive scan
manually.
10 Turn on the progressive scan mode on the
TV.
Turn off progressive scan manually
1 Turn off the progressive scan mode on the
TV.
English
EN
EN.indd Sec1:19EN.indd Sec1:19 2009-3-13 14:46:362009-3-13 14:46:36