Filter
Top Products
English
13
Connections
Step 4: Connecting TV
IMPORTANT!
–You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
– Connect the DVD system directly to
the TV.
Using component Video In jack (Cr Cb
Y)
3
AUX/
CDR IN
R
LINE OUT
DIGITAL
OUT
L
RL
FM 75Ω
FM/MW ANTENNA
AM ANTENNA FM ANTENNA
1
2
1 Use the component video cables (red/blue/
green) to connect the system’s Cr Cb Y jacks to
the corresponding Component video input jacks
on the TV set.
2 To hear the sound of this DVD Player through
your TV, use the audio cables (white/red) to
connect LINE OUT (L/R) jacks of the DVD
Player to the corresponding AUDIO IN jacks on
the TV.
Using Composite Video jacks (CVBS)
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO OUT)
jack to the video input jack (or labeled as A/V In,
Video In, Composite or Baseband) on the TV.
2 To hear the sound of this DVD Player through
your TV, use the audio cables (white/red) to
connect LINE OUT (L/R) jacks of the DVD
Player to the corresponding AUDIO IN jacks on
the TV.
AUDIO
IN
3
R
LINE OUT
DIGITAL
OUT
L
RL
FM 75Ω
FM/MW ANTENNA
AM ANTENNA FM ANTENNA
2
1
pg001-pg040_MCD510_14-Eng 2005.12.29, 17:3113