Filter
Top Products
23
English
Basic Functions
Switching the system on/off
● Press STANDBY-ON B (B on the remote).
➜ “HELLO” is displayed briefly. The system will
switch to the last selected source.
● Press SOURCE repeatedly (or DISC,
TUNER, TAPE or AUX on the remote).
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press STANDBY-ON B (B on the remote).
➜ The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Sound Control
● Press DSC repeatedly to select the desired
sound effect: FLAT, CLASSIC, JAZZ, POP or
ROCK.
● Press DBB/INCREDIBLE SURROUND on
the system to switch on or off the surround
sound effect or bass enhancement.
● You can also press DBB or IS on the remote to
turn on or off the DBB or IS function
respectively.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
Volume control
Turn the VOLUME control on the front panel
clockwise or anticlockwise or press VOL +/- on
the remote to increase or decrease the volume
level.
➜ ”VOLUME XX” is displayed on the display
panel. “XX” denotes the volume level.
To listen through the headphone
● Connect the headphone plug to the n socket
on the top of the back side of the DVD player.
➜ The speakers will be muted.
To switch off the volume temporarily
● Press MUTE on the remote.
➜ Playback will continue without sound and
“MUTE” flashes.
● To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Microphone Mixing
IMPORTANT!
–You have to activate the “MIC
SETUP” option in the system setup
menu before using the karaoke function.
Connect a microphone (not supplied) to the
system to sing along with the music source.
1 Connect a microphone to the MIC jack.
● Before connecting the microphone, set the
microphone level with VOL to the lower level to
prevent howling sound by turning the MIC VOL
knob.
2 In DISC mode, press SYSTEM MENU to
enter the system setup menu.
3 Press 22/33 on the remote to select
“AUDIO SETUP”.
4 Press 5/4 to highlight “MIC SETUP”. Then, press
33 or OK to enter its submenu.
5 Select “ON” with 5/4 and press OK to
confirm your selection. Then, press SYSTEM
MENU again to exit the system setup menu.
6 Press ECHO to increase or decrease the echo
between 00~08.
7 Start singing or talking through the microphone.
8 Press KEY to select the vocal key tone if
necessary.
Note:
–Keep the microphones away from the speakers
to prevent howling.
Key Control
This feature allows you to change the key tone
of your vocal range.
● Press KEY on the remote to decrease or
increase the vocal key level between -6 and 06.
pg001-pg04£∞_MCD515-93-Eng 2006.4.26, 10:0323