Philips MCD515/93 DVD Player User Manual


 
34
English
Tape Operation/Recording
Ta pe playback
1 Select TAPE source.
2 Press OPEN/CLOSE ç to open the tape
door.
3 Insert a recorded tape and close the tape door.
Load the tape with the open side downward
and the full spool to the left.
4 Press ÉÅ on the system to start playback.
To stop playback
Press STOP9.
Rewinding / Fast forwarding
1 Stop playback, press TUNING 22/33.
The tape will stop automatically at the end of
rewinding or fast forwarding.
2 Press STOP9 to stop rewinding or fast
forwarding.
General information on
recording
For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suitable for recording on
METAL (IEC IV) type tapes.
The best recording level is set automatically.
Altering the VOLUME, INCREDIBLE
SURROUND or DBB will not affect the
recording in progress.
At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
TUNING
PRESET
DSC
PROGRAMMODEANGLE A-B
IS
pg001-pg04£_MCD515-93-Eng 2006.4.26, 10:0334