Filter
Top Products
English
11
IMPORTANT!
– The type plate is located at the
bottom of the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
–Never make or change any
connections with the power on.
–To connect a cable to the
corresponding jack on the rear panel,
make sure to lead it through the square
hole of the stand.
–A separate power switch is provided
on the back of the subwoofer. Please
switch it on after completing all
connections in order to enjoy 2.1-channel
sound output.
Step 1: Connecting the
subwoofer
Connections
● Connect the subwoofer to the main unit with
the supplied system cable (grey).
Step 2: Placing the speakers
Front
speaker
( left )
Front
speaker
( right )
VIEWING AREA
● Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
Notes:
–To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD
System.
AUDIO
IN
S-VIDEO
IN
VIDEO IN
TV IN
AUDIO
IN
S-VIDEO
IN
VIDEO IN
TV IN
Speaker
(right)
Speaker
(left)
FM antenna
AC power
AC power
Subwoofer
pg 001-024_MCD988_Eng-12 2007.6.14, 15:5311