Philips MCM2250 Flat Panel Television User Manual


  Open as PDF
of 20
 
11EN
Program radio stations
automatically
Note
• You can program a maximum of 20 preset radio
stations.
Press and hold PROGuntilthefrequencystarts
to change.
» All available stations are programmed in the
order of waveband reception strength.
» Therstprogramedradiostationis
broadcast automatically.
Program radio stations
manually
Note
• You can program a maximum of 20 preset radio
stations.
• To overwrite a programmed radio station, store
anotheronewithitssequencenumber.
1 Tune to a radio station.
2 Press PROG to activate programming.
» Thesequencenumberblinks.
3 Press / toallocateasequence
number from 1 to 20 to this radio station,
and then press PROGtoconrm.
» Thepresetsequencenumberand
thefrequencyofthisradiostationare
displayed.
4 Repeat steps 1-3 to program more
stations.
Tune to a preset radio station
Press / toselectthesequencenumberof
the preset radio station.
7 Adjust sound
The following operations are applicable to all
supported media.
Select a preset sound effect
• Press SOUND repeatedly to select a
preset sound effect.
• DSC1, DSC2, DSC3, DSC4, and DSC5
Adjust volume level
• On the remote control, press VOL +/-
repeatedly.
• On the main unit, press VOL+/VOL-
repeatedly.
Mute sound
• Press MUTE to mute or restore the sound.
 previous next