Philips PET1035 DVD Player User Manual


 
1 Briefly press POWER on the main control of the player to
switch on the set.
2 Insert a USB flash drive or USB memory card reader into the
USB port.
The USB/SD (MMC) plug-in storage only support Mass
Storage (MSC) device. It does not support support Hard Disk
USB storage device and storage in MTP (Music Transfer
Protocol) format. SDHC (high capacity SD memory
card) cannot be supporter.
The DVD player will take some time to browse the content of
your USB flash drive.The browsing time will vary for memory
capacity and the number of content in your USB drive.
3 The player will browse and show the contents in the USB flash
device automatically.
4 Use navigation keys to select the file you want to access, then
press OK to play it.
5 At the end of the playback, unplug the USB flash drive or USB
memory card from the player.
PET1035_CCR_Eng 2007.10.12 10:38 Page 24