Filter
Top Products
60
MODEL SPECIFICATIONS
Appendix B
B
A
ppendix
Product Type
Rear-projection HDTV Monitor
Television System
NTSC standard
Channel Coverage
VHF: 2–13
UHF: 14–69
Cable TV: Midband
Superband
Hyperband
Ultraband
Power Source
AC 110 ±10%, 60 Hz
Power Consumption
255 W (average), standby <1 W
Audio Power
2 x 15 W, 50 Hz–10 kHz at 5% THD (flat response),
8-ohm load
Speaker Type
51-mm (2 in.) tweeters and 127-mm (5 in.) woofers
Video/Audio Terminals
INPUT-AV 1
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
COMPONENT VIDEO INPUTS (YPbPr)
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
Pr INPUT: 700mVp-p, 75 ohms
(The Pb INPUT jack can also receive signals from outputs
labeled Cb or B-Y.The Pr INPUT jack can also receive sig-
nals from outputs labeled Cr or R-Y.)
S-VIDEO INPUT (INPUT-AV 1, INPUT-AV2, side panel)
Y-INPUT: 1 Vp-p (includes sync), 75 ohms
C-INPUT: 300 mVp-p, 75 ohms
INPUT-AV 2
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 4
Component Video YPrPb/RGB (See page 59.)
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 5
Digital Visual Interface (DVI) (See page 59.)
AUDIO: 500 mVrms, 30 kohm
VIDEO/AUDIO OUTPUT
VIDEO: 1 Vpp, 75 ohms
AUDIO: Fixed: 500 mVrms into ˙10 kohm
Variable: 0–2 Vrms into ˙10 kohm
Side Panel (AV3)
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HEADPHONE: 1.5 Vrms, 16 ohm
Picture Visible Area
55PP9502: 1397 mm
(55 in.)
60PP9502: 1524 mm
(60 in.)
Dimensions
55PP9502: 1337 mm (W) x 1449 mm (H) x 650 mm (D)
(52.6 in. x 57.0 in. x 25.6 in.)
60PP9502: 1439 mm (W) x 1508 mm (H) x 683 mm (D)
(56.7 in. x 59.4 in. x 26.9 in.)
Weight (does not include carton)
55PP9502: 85.28 kg (188 lb)
60PP9502: 94.8 kg (209 lb)
Supplied Accessories
Remote control with two size “AA” batteries.
Design and specifications are subject to change without notice.