Filter
Top Products
7.3 Connecting a VCR
Using S-Video Input
1. Connect the S-Video (4-pin DIN) connector
from the VCR to the S-VIDEO input on the
back of display.
2. Connect the red (R) and white (L) audio
jacks from the VCR to the R and L audio-in
jacks located next to the S-VIDEO
connector.
Using Composite Input
1. Connect the ihyellowlg (video) out
connector from the VCR to the yellow Video
1 input on the back of the display.
2. Connect the red (R) and white (L) audio-out
jacks from the VCR to the R and L audio-in
jacks located next to the yellow Video
connector.
7.4 External Audio Connections
Connecting External Amplified Speakers
1. This display can be connected to an external
set of amplified speakers using the AUDIO
OUT jacks located on the back of the
display. In addition, this display is equipped
with a small 3.5 mm phono style plug for
remote turn-on applications that will auto-
matically send a remote turn-on/off signal to
the external amplified speakers.
2. Connect the red (R) and white (L) AUDIO
OUT jacks from right side of the connector
panel to the external amplified speaker.
3. As an option, you may use the remote turn-
on plug. Please note that not all external
amplified speakers can accept remote-turn
on signals.
Connecting to an External Amplifier
1. This display can be connected to an external
amplifier using the AUDIO OUT jacks
located on the back of the display. In
addition, this display is equipped with a small
3.5 mm phono style plug for remote turn-on
applications that will automatically send a
remote turn-on/off signal to the external
amplifier.
2. Connect the red (R) and white (L) AUDIO
OUT jacks from right side of the connector
panel to the external amplifier or receiver.
3. As an option, you may use the remote turn-
on plug. Please note that not all external
amplifiers can accept remote-turn on signals.
17
User Manual BDH5011