Filter
Top Products
28
User Manual BDH5011
10.1 Picture-In-Picture (PIP) /
Side-by-Side Picture (POP)
Turn On PIP or POP Mode
1. Press the PIP key once on the remote
control to engage in PIP mode. Pressing the
PIP again will switch to POP mode. Pressing
the PIP key sequentially will cycle between:
2. When engaged in PIP mode, a small window
is displayed in one of the four corners.The
OSD on the upper right corner will denote
the input selected for main picture (large
screen) and the sub-picture (small screen)
displayed.
3. If switched to POP mode, the screen will be
split in half.The screen on the left side is the
main picture and the screen on the right is
the sub-picture.The OSD on the upper right
corner will denote the input signal source
for both the main and sub-pictures.
Changing the Sub-Picture Position in PIP
Mode
1. Once the PIP mode is turned on, you can
switch the PIP sub-picture position to any
one of the four corners of the screen.
2. Press the POSITION key to switch position.
Pressing the POSITION key repeatedly will
cycle through all four corners of the screen.
3.
This function is not applicable under POP mode.
M: AV1
S: AV2
Input Source for
Main Picture
Input Source for
Sub Picture
Sub Picture
Main Picture
M: AV1
S: AV2
Input Source for
Main Picture
Input Source for
Sub Picture
Sub Picture
Main Picture
Position 1
(Default)
PIP Mode
POP Mode
Sub-Picture Positions
10. Advanced Functions