Filter
Top Products
NTSC/PAL Settings, Black Level Shift 15
NTSC/PAL Settings
You can switch the NTSC/PAL setting of the DVD Player to
match the color system of your TV. Most TVs in the United States
use the NTSC color system. So, if your TV uses NTSC, set the
DVD Player to NTSC. The Discs you play should have the same
color system (NTSC or PAL) that you choose for the DVD Player
and TV. To change the DVD Player’s NTSC/PAL setting, follow
the steps below. Read through all the steps first to become
familiar with the process.
1
Press POWER ON/OFF on the front of the DVD Player
to turn Off the DVD Player.
2
Press and hold STOP C and NEXT G on the front of the
DVD Player. While still holding STOP C and NEXT G,
press POWER ON/OFF to turn on the DVD Player.
3
After PAL or NTSC appears on the DVD Player’s display
panel, release STOP C and NEXT G. The PAL or NTSC
indicator that appears is the current setting.
4
To change the setting, press NEXT G within three sec-
onds. The new setting (PAL or NTSC) will appear on the display
briefly.
Black Level Shift
If you set the DVD Player to NTSC, set Black level shift to On.
This will improve the color contrast during Disc playback. Black
level shift has no effect if the DVD Player is set to PAL. To set
Black level shift to On, follow these steps.
1
Press the SYSTEM MENU button. will be selected.
Press p.
2
will be selected. Press B.
3
Press p to select Black level shift, then press B.
Press o or p to select On or Off, then press OK.
4
Press the SYSTEM MENU button to remove the menu.
1-2
2-3
4
ZY dZY d
PLAY
PREV
STOP
NEXT
SOUND
OPEN
/
CLOSE
PAUSE
POWER ON/OFF
DVD 712
DVD/VIDEO CD/CD PLAYER
by
• You may need to turn off the
DVD Player, then turn it on
again, before your NTSC/PAL
changes take effect.
• You also may select NTSC, PAL,
or Auto in the DVD Player’s
menu. Press the SYSTEM MENU
button. will be selected; press
p. will be selected; press B.
Then, press p repeatedly to
select TV System, then press B.
Press o or p to choose NTSC,
PAL, or Auto, then press OK.
Press the SYSTEM MENU but-
ton to remove the menu.
•
Select AUTO only if your TV has
both NTSC and PAL and you are
using the (CVBS) VIDEO OUT
jack. Slight picture distortions
may occur; this is normal. AUTO
provides the best picture quality.
Helpful Hints
ZY dZY d