The Title Settings Menu lets you rename a Title or recording on a
DVD+RW/DVD+R. From the same menu, you can play the entire selected
Title or erase the chosen Title from the Disc.
1
When playback is stopped and a DVD+RW or DVD+R is in the
DVD Recorder, the Index Picture Screen will appear automatically.
Details are on page 35.
2
Press 89 to select the Index Picture of the recording you
want to name, play, or erase, then press :. The Title settings
menu will appear.
3
Press 89 to select Name, Play full title, or Erase this title,
then continue as directed for each option in step 4.
4
●
Name
Press :. The first character of the Title name will be selected.
Press 89 to change the character.
Press SELECT to switch between upper and lower case letters.
Press CLEAR to erase a character. To move to the next or previous
character, press ;:.
Repeat this process until you have finished naming the Title.
When the Title is complete, press OK. Storing name will
appear while the name is stored.
●
Play full title
Press OK. The Disc will begin to play from the beginning of the
Title you selected.
●
Erase this title
Press OK. The DVD Recorder will ask you to confirm that you
really want to erase the entire Title. Press OK again to start
erasing the Title. “Erasing title” will appear during erasure. When
erasing is complete, the Index Picture Screen will reappear.
(If you do not want to erase the Title, press ; to return to the
Title Settings menu instead.)
5
Press
;
to return to the Index Picture Screen if necessary.
• If you erase a Title from a
DVD+R, you can not reuse the
space for other recordings.
“Deleted title” will appear
beside an empty Index Picture
box. Recordings are made at
the end of a DVD+R
automatically.
Helpful Hint
DVD+RW DVD+R
