Philips DVDR985 DVD Player User Manual


 
Access Control (cont’d) 51
The Access Control screen will
appear when you try to play a
Locked Disc. If you do not know
your code, press STOP çC. Then,
select Access Control as
described in steps 1-3 on page
49. When you are asked to
enter the code, press STOP C
four times. Press SYSTEM
MENU, then press PLAY : to
start playback. This restores all
the Access Control settings to
their original factory settings.
Two-sided DVDs may have a dif-
ferent ID for each side. To
unlock the entire Disc, unlock
each side.
Multi-volume Disc sets may have
a different ID for each volume.
Unlock each volume.
Helpful Hints
1
Locking or Unlocking Specific Discs
Not all DVDs are rated or coded by Parental levels. You may choose to
specifically lock or unlock a Disc by choosing Play once or Play always. This
way, you can disable viewing regardless of the rating of the DVD. You will
need to know your 4-digit code in order to view the Disc.
1
Insert a Disc. The Access Control message will appear on the TV
screen. (Child Lock should be Locked. Details are on page 50.)
2
Press 89 to select Play once or Play always. Then, press
the Number buttons to enter your four-digit code.
If you select Play Once, the Disc will play one time. If you stop play-
back, open the Disc tray, or turn off the Recorders power, the
Access Control screen will reappear when you try to play the Disc
again.
If you select Play Always, the Disc will play even if you turn off the
DVD Recorder, open the disc tray, or set Child Lock to Ç
(Locked). Details are on page 50.
3
If you later decide to lock the Disc so that it will not play
always:
When you insert the Disc, playback begins automatically and safe
{{
appears on the TV screen. Press STOP C while safe
{{
is on
the TV screen. Locked
||
will appear. If the Disc continues play-
ing, press STOP C again to stop playback. You may need to turn off
the DVD Recorder or remove the Disc before the Disc is com-
pletely Locked. The next time you turn on the DVD Recorder or
try to play the Disc, the Access Control screen will appear. The
Disc will not play unless you enter the four-digit code.
Insert a Disc.
MONITOR ON/OFF
REC/OTR
NEXTPREVIOUS
REVERSE PAUSE SLOW FORWARD
STOP FSS PLAY
CLEAR
CH
SELECT
TIMER
T/C A/CH
MUTE
VOL
2
3
2
locked
Access Control
|
p Play once [ ] [ ] [ ] [ ]
Play always [ ] [ ] [ ] [ ]
Choose 'Play always' to insert the disc in
the child-safe list