Filter
Top Products
English
22
Starting disc playback
A Turn on the TV to the correct program
number for the DVD player (e.g. ‘EXT’,
‘0’, ‘AV’).
B Press STANDBY-ON 2 to turn on
the DVD player.
C Press OPEN CLOSE ç on the front of
the DVD player.
You can also hold down the STOP
button on the remote control to open
and close the disc tray.
D Place a disc into the disc tray with the
label facing up, then press OPEN
CLOSE ç.
For double-sided discs, load the side
which you want to play facing up.
E Playback may start automatically.
If not, press PLAY/PAUSE X
Å
.
If a disc menu appears on the TV, see
page 23 'Using the Disc Menu'.
If the child lock was activated for the
inserted disc, you have to enter your
four-digit password (see page 36).
For more playback features, see pages
22~26.
Playback Features
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
A
During playback, press PLAY/PAUSE
X
Å
to pause playback and display a still
picture.
Sound will be muted.
B Press T to select the next picture frame.
C To resume normal playback, press
PLAY/PAUSE X
Å
again.
Selecting title/chapter/track
Press PREV í / NEXT ë to go to
the previous or next title/chapter/track.
In STOP mode, press DISPLAY to
display the disc information text line for
title/chapter/track (example - 00/08).
Use alphanumeric keypad (0-9) to
enter valid title/chapter/track number,
then press OK.
The playback skips to the selected
title/chapter/track.
Stopping playback
Press STOP
.
Tips:
– Screen saver will start automatically if the
disc playback is stopped for 5 minutes.
– The player will automatically turn to Power
Standby mode if you do not press any
buttons for 15 minutes after the disc has
stopped playing.
01-43_dvp3040_37_eng2.indd 2201-43_dvp3040_37_eng2.indd 22 2006-07-14 3:35:38 PM2006-07-14 3:35:38 PM