Filter
Top Products
11
Noise reduction
This control allows you to reduce the noise in the picture
due to poor reception or poor picture quality.
Select
OFF, NR-1, NR-2 or NR-3 according to the level of
noise present.
Note: Select RESET in the OPTION 1 menu, p. 13, to restore the
predefined factory PICTURE settings.
Color temperature
This control allows you to select the color temperature and
the white balance of the picture.
& Press the cursor left/right to select HIGH (bluer), MIDDLE
(standard), MIDDLE LOW (redder) or LOW (white balance).
é Select LOW to adjust the white balance for bright and dark
pictures.
“ Press the OK button to display the WHITE BALANCE
menu.
‘ Select and adjust Red-Green-Blue Gain to adjust the white
balance for signal level.
Select and adjust Red-Green-Blue
Bias to adjust the white
balance for black level.
Reset
This control allows you to reset the white balance settings
back to the predefined factory values and settings.
Gamma
This control allows you to adjust the brightness of the
midtone areas while keeping shadows and highlights
unchanged.
Select
1 to 4.
The picture becomes darker as the number increases;
Low tone
This control allows to reproduce more detailed tone
especially in the dark area.
Select
AUTO or 1 to 3.
•
AUTO will automatically upraise the picture and make
adjustments;
•
1 is suitable for still pictures;
•
2 for motion pictures;
•
3 will apply the error diffusion method.
Color tune
(This function can adjust video input and DVD/HD input only.)
This control allows you to adjust the hue and color density
for red, green, blue, yellow, magenta and cyan.
You can accentuate the green color of trees, the blue of the
sky, etc.
RESET resets the settings to the predefined factory values.
o previous page
COLOR TEMP.
GAMMA
LOW TONE
(COLOR TUNE)
PICTURE 2 2/2
OK
J
SELECT
LM
ADJUST MENU RETURN
L
MIDDLE
M
GAIN RED
GREEN
BLUE
BIAS RED
GREEN
BLUE
RESET
WHITE BALANCE
COLOR TEMP.
L M
J
SELECT
L M
ADJUST MENU RETURN
2268.1 am 03-12-2003 09:47 Pagina 11