Filter
Top Products
14
o previous page
POWER MGT.
(CINEMA MODE)
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
POWER ON MODE
OPTION 2 2/2
J
SELECT
L M
ADJUST MENU RETURN
Option 2 menu
Power management (only in VGAmode and DVI input)
Select
POWER MGT. ON to turn the power management
function on.
The power management function is an energy-saving
function and automatically reduces the monitor’s power
consumption if the computer’s keyboard or mouse in not
operated for a certain time. (See also the computer’s
operating instructions).
Note: if the computer’s power is not turned on, the power
management function is set to
OFF.
Cinema mode
Select
CINEMA MODE ON to automatically discriminate
and project the film image in a cinema mode suited to the
picture (NTSC, PAL60, 480I, (60Hz) only).
Long life
This control allows you to select a setting to prevent or to
reduce burn-in of the screen.
& Select LONG LIFE.
é Press the cursor right to enter the menu.
“ Select PLE AUTO or LOCK 1, 2 or 3.
•
AUTO automatically adjusts the brightness of the screen
to suit the picture quality.
•
LOCK sets the brightness level to minimum in the order
of
LOCK 1, 2, 3.
‘ Select ORBITER ON to shift the picture.
This function allows you to decrease the picture burn of
horizontal dot and vertical line.
( Select INVERSE ON, OFF or WHITE.
•
ON : the picture is displayed alternately between positive
and negative image.
•
WHITE : the entire screen turns white.
•
OFF : the inverse mode does not function.
When having selected
ON,press the OK button to enter
the inverse/WT menu and to set the timer functions.
- Select
WORKING TIME and enter the hours (h) and
minutes (m) with the cursor buttons to select the time
the inverse mode has to be active.
- Select
WAITING TIME and enter the hours (h) and
minutes (m) with the cursor buttons to select the time
after which the inverse mode should become active.
§ Select SCREEN WIPER ON or OFF.
• Select
ON and press the OK button:
a white vertical bar is moving from left to right over the
screen to prevent burn-in.
• Set the timer functions (see the inverse mode) and the
speed (from 1, fast, to 5, slow) with the cursor buttons in
the
SCREEN WIPER menu.
è Select SOFT FOCUS OFF, 1-4.
SOFT FOCUS settings reduce the edges and soften the
picture.The higher numbers create a softer image.
PLE AUTO
(ORBITER)
INVERSE
SCREEN WIPER
SOFT FOCUS
LONG LIFE
J
SELECT
L M
ADJUST MENU RETURN
L
ON
M
2268.1 am 03-12-2003 09:47 Pagina 14