Filter
Top Products
T
his feature allows you to edit or skip channels from the channel
list that have bad or weak signals or channels you do not want
to watch.
1
Press the MENU/SELECT button. The on-screen menu
appears. Then press the CURSOR RING DOWN repeatedly
until INSTALL is highlighted. Press the CURSOR RING
right to enter the INSTALL submenu.
2
Press the CURSOR RING DOWN repeatedly until CHAN-
NEL EDIT is highlighted. Then press the CURSOR RING
RIGHT or LEFT to access the CHANNEL EDIT list.
3
Press the CURSOR RING UP or DOWN to scroll through
the list of channels. Or press the NUMBER buttons on your
remote control to select a specific channel.
4
With the channel you want to edit selected, press the
CURSOR RING RIGHT to mark the channel as SKIPPED.
(Channels you mark SKIPPED will not appear when you use
the CH[annel] +/– buttons to change channels while watching
TV.)
When you want to add a channel that has been marked
SKIPPED, press the CURSOR RING UP or DOWN to high-
light the channel. Then press the CURSOR RING RIGHT to
remove the word SKIPPED.
5
Press the STATUS/EXIT button to exit the menu.
SETTING TIME MANUALLY
1
Follow steps 1–3 above, then press the CURSOR RING
DOWN to highlight MANUAL and CURSOR RING RIGHT
to enter the MANUAL time input area.
2
Use the number buttons on your remote control to input
the first digit for the time. You can also press the CURSOR
RING UP or DOWN to select a digit. Press the CURSOR
RING RIGHT to move to the next digit input slot and input
the time.
If you should need to change a number you have input, you
can cursor left or right to the digit input slot to make the cor-
rection.
3
After you have input the time, press the CURSOR RING
RIGHT to enter the AM/PM area. Then press the CURSOR
RING UP or DOWN to select AM or PM.
4
Press the STATUS/EXIT button to exit the menu.
*AutoChron is a trademark of Philips Consumer Electronics North
America. Copyright © 2003 Philips Consumer Electronics.
S
ETTING TIME AUTOMATICALLY
The steps in this section tell you how to set AutoChron™ to
download the time from your PBS station to your TV. After suc-
cessful setup, AutoChron™ will automatically maintain the cor-
rect time using your PBS station until you set the time manually.
1
Press the MENU/SELECT button. The on-screen menu
appears. Then press the CURSOR RING DOWN repeatedly
until INSTALL is highlighted.
2
Press the CURSOR RING RIGHT to enter the INSTALL
submenu. Then press the CURSOR RING DOWN repeated-
ly until AutoChron is highlighted.
3
Press the CURSOR RING RIGHT to enter the AutoChron
SET TIME area.
4
Press the CURSOR RING RIGHT again to select AUTO.
Within a few seconds, a menu containing the time-zone
options appears.
5
If necessary, press the CURSOR RING UP or DOWN to
highlight your correct time zone. Then press the CURSOR
RING RIGHT. Within a few seconds, the option of Daylight
Savings Time appears on screen.
6
If the Daylight Savings Time option you want to select is
not highlighted, press the CURSOR RING UP or DOWN
to highlight the option. Then press the CURSOR RING
RIGHT to activate your selection.
7
Press the number buttons on your remote to enter the chan-
nel number for your PBS station (02, 15, or 121, for exam-
ple). Wait until the TV completes its search. If the time was
not found, you will need to locate the correct channel number
for your PBS station and input that number.
8
Press the STATUS/EXIT button to exit the menu.
5
U
SING THE
INSTALLATION
FEATURES
AutoChron™
CHANNEL EDIT
213
546
TV
SWAP PIP CH
DN
UP
FREEZE
SOUND
MUTE
POWER
PICTURE
STATUS/
EXIT
VCR
ACC
MENU/
SELECT
VOL
CH
ACTIVE
CONTROL
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
AV3
AV4
1
2 SKIPPED
3
1
4
3
2
5
AV3
AV4
1
2
3
PIP
213
546
879
0
TV
SWAP PIP CH
DN
UP
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
POSITION
VCR
ACC
MENU/
SELECT
VOL
CH
TV/VCR
ACTIVE
CONTROL
SET TIME
AUTO
MANUAL
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
SET TIME
CENTRAL
MOUNTAIN
PACIFIC
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
DAYLIGHT
SAVING TIME?
YES
NO
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
SEARCH FOR
TIME
ENTER CHANNEL
02 PBS
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
SEARCH FOR
TIME
PLEASE WAIT
15 PBS
SEARCH FOR
TIME
TIME FOUND
END: PRESS STATUS
11:15 AM
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
SEARCH FOR
TIME
TIME NOT FOUND
RE-ENTER CHANNEL
15 PBS
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
OR
1
2,3,
4
7
8
5, 6
AUTO
MANUAL
TIME ZONE?
The message shown to the
right indicates that
AutoChron™ is not finding
a PBS station at the chan-
nel you input. Check the
channel number for your
PBS station.You will need
to input the correct num-
ber for the time to be
found.
213
TV
SWAP PIP CH
DN
UP
FREEZE
SOUND
MUTE
POWER
PICTURE
STATUS/
EXIT
VCR
ACC
MENU/
SELECT
VOL
CH
ACTIVE
CONTROL
SET TIME
AUTO
MANUAL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
11:00 AM
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
1
3
4
2
ENTER TIME
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
PIP ON/OFF
879
0
SURF
A/CH
SURF
ITR/
RECORD
HOME
VIDEO
HOME
MOVIES
PERSONAL
SLEEP
REC •
PIPPOSITION
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
Channels that Auto
Program (see page 4)
determined not to con-
tain active broadcast sig-
nals are marked
SKIPPED.
H
ELPFUL HINT
H
ELPFUL HINTS
• The CLOCK button
\ on your remote
provides another way
in which you can set
the TV’s clock manu-
ally.
• After setting the
clock, you will be
able to access the
time by pressing the
STATUS/EXIT but-
ton. Or you can view
the time constantly in
the upper right-hand
corner of the screen
by turning the DIS-
PLAY control on (see
page 40 in the
Directions for Use
manual).
A
utoChron™* gives you the option of setting the time manually
or automatically.