Filter
Top Products
TROUBLESHOOTING GUIDE
• Problem:
– Solution:
• TV is not responding and the green light does not flash when
you press a button.
– Replace batteries with two new 1.5 volt, type RO3, UM4 or
AAA batteries.
• TV is not responding, but the green light does flash when you
press a button.
– Aim the SBC RU110 at the TV and be sure that there are no
obstructions between the SBC RU110 and the TV.
• The SBC RU110 is not performing commands properly.
– You may be using the wrong code. Try repeating Set up using
another code, listed under your brand, or start the Autosearch
Set-up over again to locate the proper code.
If the TV still doesn’t respond, call the help-line and we’ll put
you back on track.
• Your brand is not listed in the code list.
– Try the hands-free Autosearch method.
NEED HELP?
If you have any questions about the SBC RU110, please call
our help-line for assistance! You can find the number in the
code list section of this booklet.
Before you call, please read this manual carefully. You will be
able to solve most of your problems. If you don’t find an
answer to your questions, make a note of your TV in the table
at the back of the code list section of this booklet. This makes
it easier and faster for our operators to help you. Look for the
model number in the TV instruction manual, or on the back of
your TV. When calling our help-line please have your TV close
by, so our operators can help you verify the functionality of
your remote control.
Instructions for use
5
English