Filter
Top Products
3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 y Standby. . . . . . . . . switches TV,VCR or DVD mode on or off.
2 Indicator light . . . . . - lights up green when an IR signal is being sent.
- flashes green when a code is being entered and
when automatically setting the remote control.
3 TV - VCR/DVD . . . . select the device you want to operate:
TV,VCR or DVD.
4 s (Mute). . . . . . . . . . mutes the sound of the TV.
5 - PROG + . . . . . . . . . selects a previous or following channel.
6 (Menu). . . . . . . . turns the menu on and off.
7 Digital keys . . . . . . . direct choice of channels and other functions.
8 SHIFT . . . . . . . . . . . . for extra functions.When pressed at the same
time as a second key, the second key will get
another function. For example:
SHIFT + PROG+:. . 'menu up'
SHIFT + PROG-:. . 'menu down'
SHIFT + VOL+:. . . . 'menu right'
SHIFT + VOL-:. . . . 'menu left'
Tr y out other combinations with the Shift-key on your appliance in order to
find out which functions are available. Only functions featured on the original
remote control are available.
9 . . . . . . . . . . . . . . . switches teletext on.
0 5. . . . . . . . . . . . . . . . . - red teletext key
- rewind (VCR/DVD)
9 . . . . . . . . . . . . . . . . . - green teletext key
- stop (VCR/DVD)
0 . . . . . . . . . . . . . . . . . record (VCR/DVD)
;. . . . . . . . . . . . . . . . . . - yellow teletext key
- pause (VCR/DVD)
6. . . . . . . . . . . . . . . . . - blue teletext key
- wind (VCR/DVD)
2 . . . . . . . . . . . . . . . . . - white teletext key
- play (VCR/DVD)
! . . . . . . . . . . . . . . . switches teletext off.
@ -/-- . . . . . . . . . . . . . . . . selects between one- and two-figure channel
numbers.
# OK . . . . . . . . . . . . . . . confirms your selection.
$ - VOL + . . . . . . . . . . . adjusts the TV volume.
% AV. . . . . . . . . . . . . . . . switches between external inputs of your
equipment.
Note! The VOL – /VOL + and s (Mute) keys give direct access to the TV volume
even if you are operating your VCR or DVD equipment.
If the device does not respond at all, or not to all of the key
commands, follow the instructions under ‘Setting the remote control’.
It is possible that you must enter another code for the device.
7
Instructions for use
English
RU252.qxd 04-06-2004 16:55 Pagina 7