Filter
Top Products
7 Press a key to copy from.
(The keys below the part-line, Standby key, and the SMART CONTROLS
can be copied.)
Note: Select a Smart Control with the SMART CONTROLS and press SEND to copy.
➜ TO (first line)
8 Use SMART CONTROLS to select the device you want to copy the key
function to.
➜ DVD (for example - second line)
9 Confirm with SEND.
10 Press the key you want the function to be copied to.
➜ STORED (second line)
Note: Select a Smart Control with the SMART CONTROLS and press SEND to copy.
Macro keys
With a macro key you can operate a series of functions by pressing one single key. E.g.
switching on all devices installed with one key.
1 Press and hold SETUP until SETUP lights up in the display.
➜ DEV (first line)
➜ ADD (second line)
2 Use the Device Selection keys to select KEY.
➜ KEY (first line)
3 Use SMART CONTROLS to select MACRO.
➜ MACRO (second line)
4 Confirm with SEND.
5 Use SMART CONTROLS to select the device on which you want to install the
Macro.
➜ TV (for example - second line)
6 Confirm with SEND.
7 In TV mode, press a key where the macro should be stored.
➜ MACRO (first line)
➜ START (second line)
Notes: - Press the keys in the sequence that you want your equipment to respond.
- The keys below the part-line, STANDBY key, and the SMART CONTROLS can be
macro keys.
- Select a smart control with the SMART CONTROLS and press SEND to select as
macro key.
- After every key press SMART ADDED is displayed.
8 Start pressing the keys you want to store in the macro. If necessary by navigating
trough different device modes and smart controls.
Note: Press SHIFT + SEND to store a Smart Control into the macro.
9 Press SEND.
➜ STORED (second line)
2. Smart controls
With the programmable SMART CONTROLS you can add up to eight special features in
each device mode. E.g Dolby Surround, EPG, Showview, Subtitle, etc. For example: if you
have installed an amplifier with Dolby Surround, you can control that feature via a
SMART CONTROL on the RU 865. A number of features has already been pre-installed
in the RU 865 memory.These features can be removed or replaced by features of your
own choice.
Add key
1 Press and hold SETUP until SETUP lights up in the display.
➜ DEV (first line)
➜ ADD (second line)
2 Use the Device Selection keys to select KEY.
➜ KEY (first line)
3 Use SMART CONTROLS to select ADD.
➜ ADD (second line)
ENGLISH
8
XP SBC RU 865.1 15-08-2002 10:26 Pagina 8