Filter
Top Products
English
35
DVD Menu Options (continued)
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
Night Mode
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A In ‘Audio’, press ST to select { Night
Mode }, then press X.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
B Use ST to select a setting and press
OK to con rm.
Down Sampling
You can enable and disable the digital
signal for better sound output quality.
A In ‘Audio’, press ST to select { Down
Sampling }, then press X.
{ Off }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
{ On }
Playback a disc recorded at the sampling
rate of 48kHz.
B Use ST to select a setting and press
OK to con rm.
Audio Output
You can set the audio output of the DVD
Player.
A In ‘Audio’, press ST to select { Audio
Output }, then press X.
{ Multi channel }
All channels could output audio.
{ Stereo }
Only left channel and right channel could
output audio.
B Use ST to select a setting and press
OK to con rm.
Tip:
– During Multi Channel mode you may not
be able to hear the complete spectrum of
music/dialogue through the ampli er output
with some Multi Channel discs.
dvp3136_94_eng 4.indd 35dvp3136_94_eng 4.indd 35 2007-06-05 9:58:31 AM2007-06-05 9:58:31 AM