Philips SRU 1018 Universal Remote User Manual


 
Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-68
Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
1. Introduction
Congratulations on your purchase of the Philips SRU 1018 universal remote control.
The SRU 1018 is a handy zapper with all main keys and ergonomic shape for comfortable control.
After installing the remote control it can operate the most-used functions of almost any brand of TV.
You can find information about how to prepare this remote control for use in the chapter
‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1 Press the cover inwards and lift it up.
2 Place two R03, UM4 or AAA type batteries into the battery compartment,
as shown.
3 Replace the cover and click it firmly into place.
Testing the remote control
Because the SRU 1018 may use different signals for each brand and even for different models of the same
brand, it is advisable to test whether your TV responds to the SRU 1018.
The example below instructs you how to do this.
1 Turn your TV on manually or use the original remote control.Tune to channel 1.
2 Check whether all the keys are working.
For an overview of the keys and their functions see ‘3.Keys and functions’.
If the TV responds as it should to all of the key commands the SRU 1018 is
ready for use.
If the device does not respond at all or not to all of the key
commands, follow the instructions under ‘Setting the remote control’or for online setup got
to:www.philips.com/urc.
4 ENGLISH