Philips SRU 1018 Universal Remote User Manual


 
3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 Indicator light . . . . flashes / lights up when a key / key combination is pressed.
2 a . . . . . . . . . . . . . . . . switches Teletext on.
3 E . . . . . . . . . . . . . . . . selects between regular (4:3) and wide screen (16:9) TV.
4 PROG + . . . . . . . . . . selects a following channel.
5 VOL – . . . . . . . . . . . . reduces the TV volume.
6 PROG –. . . . . . . . . . . selects a previous channel.
7 Digit keys. . . . . . . . . direct choice of channels and other functions.
8 VOL + . . . . . . . . . . . . increases the TV volume.
9 s (Mute) . . . . . . . . . mutes the sound of the TV.
0 I . . . . . . . . . . . . . . . . switches Teletext off.
! y (Standby). . . . . . . switches the TV on or off.
4. Troubleshooting
Problem
Solution
The device you want to operate does not respond when you press a key.
Replace the old batteries with two new R03, UM4 or AAA type batteries.
Point the SRU 1018 at the device and make sure that there are no obstructions between the SRU 1018 and
the device.
The SRU 1018 does not respond properly to commands.
Maybe you are using the wrong code.Try programming the SRU 1018 again using another code, which is
mentioned under the brand of your device, or reset for automatic search to find the right code.
Your brand of device is not in the code list.
Try to set the SRU 1018 automatically. See ‘Automatically setting the remote control’.
None of the codes works during manual setting of the remote control.
If that is the case, follow the instructions under ‘Automatically setting the remote control’.
7ENGLISH