Filter
Top Products
Poor reception
The proximity of mountains or high buildings may be responsible for ghost pictures,
echoing or shadows. If this is the case, modify the orientation of the outside aerial.
Check that the TV channel is tuned in corre c t ly or try using fine tuning:see "fine tuning" (p.6 ) .
The equipment connected to the TV gives a picture in black and white? Check that you
have selected the correct
E2 or E2 Y/C socket ( key).
No picture
Have you forgotten to connect the aerial socket? Have you chosen the correct system?
(p. 6) Does your aerial enable you to receive broadcasts in this frequency range?
Poorly connected euroconnector cables or aerial sockets are often the cause of picture
or sound problems (sometimes the connectors can become half disconnected if the TV
set is moved or turned). Check all connections.
Picture adjustment
If you have trouble obtaining a clear picture, select one of the smart control presets
(p. 8) and store using the STORE PP ALL function in the FEATURES menu.
The picture seems too red or too blue! Adjust the
TINT (p.10).
In the event of difficult reception (snowy picture) switch the
NOISE.REDUCT on
the
PICTURE menu to ON. (p. 10).
The picture is badly adjusted? press the green
key or re-adjust (p. 10).
To reset the stored settings for each programme and return to the initial settings, hold
the green
key down for 3 seconds.
No sound
If on certain channels you receive a picture but have no sound, this means that you do
not have the correct TV system. Modify the
SYSTEM adjustment (p. 6).
Remote control
The TV set does not react to the remote control;the orange indicator on the TV set
no longer flashes when you use the remote control? Replace the batteries.
Standby
When you switch the TV set on it remains in standby mode and the indication
CHILD LOCK is displayed when you use the keys on the TV set? The child lock function
is switched on (p. 11).
To save electricity it is advisable to switch the TV set off using the
O N / O F F key on the
f ront of the set. If the set receives no signal for 15 mins, it automatically goes into
standby mode.
Various
The menus appear in a different language? Re-select language choice (p. 4).
Characters remain displayed on the screen? The
MESSAGE function is switched on
(p. 12).The
key on the remote control no longer functions? Re-select
FAVOURITE PRG menu (p. 7).
Still no results ?
If you have a problem with your TV set,never attempt to repair it yourself: contact
your dealer's after-sales service.
Recycling directive
Your TV set uses materials which are reusable or which can be recycled.
To minimise the amount of waste in the environment, specialist companies recover used
sets for dismantling and collection of reusable materials (consult your dealer).
17
Tips