Philips Television Set & Remote Control CRT Television User Manual


 
To access the presets of the TV set.
Smart Picture Controls: Press the
key to obtain
the following settings:
RICH, SOFT, NATURAL and
return to
MANUAL.
Smart Sound Controls: Press the
key to obtain
the following settings:
SPEECH, MUSIC, THEATRE
and return to MANUAL.
The values corresponding to these presets are given in the
PICTURE and SOUND menus (see p. 10).
These allow direct access to any adjustment made
in the
PICTURE and SOUND menus (see p.10)
To program the keys:
If, for example,you wished to gain direct access to
the
BRIGHTNESS adjustment. Display the PICTURE
menu (red key) and select BRIGHTNESS
( ). Use keys and to adjust, rather than
the
keys.The keys are now programmed. Exit
from the menu (blue
key).Press and
again.This will give you direct access to the
brightness adjustment. Repeat for any other
adjustment you may wish to make.
Programmable
keys
"Smart
Controls" keys
8
The TV set is switched off and the red indicator
lights up.To switch the TV set on again, press
or keys to .
For further information, see "Tips" (p. 17).
Using the remote control
Press:
Result:
Standby
Selecting TV
programmes
Move up or down a programme.
To sequentially display all of the programmes hold
the key down for 3 seconds.Press again to cancel.
N.B.: Only programmes activated in the FAVOURITE
PRGS menu can be accessed (see p. 7).
Choose a programme.
For a 2 figure number, the second figure must be
entered before the dash disappears.
Numerical keys
Return to the last programme watched.
Gives access to the presets for games consoles and
digital equipment:
E1 DIGITAL, E1 GAMES BACK and
E2 GAMES FRONT (refer to p.15).
Previous
programme
Digital and
Games Presets
Volume
The volume is adjusted.
Mute key
Disables or enables the sound.
/
(white
key)