Philips TS2556C1 CRT Television User Manual


 
75
VIDEO
L/MONO
AUDIO
R
in
SOUND STEREO
AVL ON
INPUT
SLEEPTIMER OFF
SmartLock
ANTENNA
EXT 1
1
ANTENNA
OUT
ANTENNA
IN
VIDEO
AUDIO
IN
IN
OUTOUT
LR
2
3
75
VIDEO
L/MONO
AUDIO
R
in
1
POWER
SLEEPCLOCKCC
1
2
3
65
4
7
8
9
0
A/CH
SURF
STATUS
EXIT
MENU
MUTE
SMART SMART
SOUND PICTURE
CH
VOL
4
5
6
The TV’s Audio/Video Input jacks
are for direct picture and sound
connections between the TV and
a VCR (or similar device) that
has Audio/Video Output jacks.
Connect the VIDEO (yellow)
CABLE to the VIDEO IN jack
on the back of the TV. Then con-
nect the AUDIO (red and white)
CABLES to the AUDIO (left and
right) IN jacks on the rear of the
TV.
Connect the VIDEO (yellow)
CABLE to the VIDEO OUT jack
on the back of the VCR. Then
connect the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.
Turn the VCR and the TV
ON.
Press the MENU button on
the remote to display the
onscreen menu.
Press the CURSOR UP or
CURSOR DOWN buttons
until the word INPUT is high-
lighted.
Press the CURSOR RIGHT
or CURSOR LEFT button
to display the picture/sound menu
(ANTENNA, EXT 1). Use the
CURSOR UP or DOWN
buttons to select.
Now your ready to place a prere-
corded video tape in the VCR and
press the PLAY button.
AUDIO IN
(RED/WHITE)
VCR
(EQUIPPED WITH
VIDEO AND AUDIO
OUTPUT JACKS)
VIDEO IN
(YELLOW)
HOW TO USE THE INPUT CONTROL (A/V INPUTS)
BEGIN
BACK OF VCR
IF YOU ARE USING A
MONO DEVICE, USE
ONLY THE AUDIO
L/MONO JACK. IF A
DUMMY JACK IS
PLUGGED INTO THE
AUDIO R, NO SOUND
WILL BE HEARD.
AUDIO/VIDEO INPUTS
BACK OF TV