Filter
Top Products
15
Monitor function
You can switch back and forth between the TV picture and video recorder picture with
MONITOR . But this only works when you use a scart cable to connect the video recorder to
your TV set and your TV set responds to this switch-over.
Sorting and clearing TV channels manually
After you have performed the automatic channel search you may not agree with the sequence in
which the individual TV channels have been allocated to the programme positions (programme
numbers) of the video recorder. You can use this function to individually sort the TV channels
already saved or to delete unwanted TV channels or those with poor reception.
1 Switch on the TV set. If required, select the programme number for
the video recorder.
2 Press MENU on the remote control. 'CLK' will appear on the display.
3 In the display, select 'ALLO' (Manual TV channel search) with
P =r or P ;q .
4 Press OK .
CH21
5 Using P ;q or P =r , select the saved TV channel that you want
to assign to the programme number '01'.
6 Confirm with OK .
7 The next highest programme number (e.g. '02') will briefly appear in
the display. After that, the channel number of the already allocated TV
channel will blink.
8 Using P ;q or P =r , select the saved TV channel that you want
to assign to this programme number (e.g. '02').
Deleting TV channels
Unwanted channels or those with poor reception can be deleted using
CLEAR (CL) .
9 Confirm with OK .
0 To assign other TV channels to a programme number, repeat steps
7 to 9 .
A Confirm the assignment of the TV channel with MENU .
B To exit the main menu, press MENU .
ENGLISH
Installing your video recording