Filter
Top Products
32
Automatic switchoff
If you haven't used the video recorder for a few minutes in certain modes (e.g.: STOP), it will
switch to standby automatically. You can cancel this function to use the video recorder as a
television receiver.
1 Press MENU on the remote control. 'CLK' will appear on the display.
2 In the display, select 'AST' (Automatic switch-off) with P =r or
P ;q and confirm with OK .
3 Select 'AST-' (no automatic switch-off) or 'AST+' (automatic
switch-off) with the menu buttons P =r or P ;q .
4 Confirm with OK .
'OK' will briefly flash in the video recorder display.
5 To end, press MENU .
Other functions