Filter
Top Products
43
43
ENGLISH SWITCHING THE MODULATOR ON AND OFF
SSwwiittcchhiinngg tthhee mmoodduullaattoorr oonn aanndd ooffff
If picture and sound interference cannot be removed by optimizing the
modulator, the integral modulator can be switched off.Warning: this is
only possible if you have connected the video recorder to the TV set
with a scart cable. It is not possible to operate with the modulator
switched off without a scart cable.
FFOORR
EEXXPPEERRTTSS
7 Leave the on-screen menu with the
MMEENNUU
button
6 Confirm the new modulator frequency with
OOKK
. In the display there will briefly appear OK
SSwwiittcchhiinngg ooffff tthhee mmoodduullaattoorr
If you have connected the video recorder to the TV set
with a scart cable, you can switch off the modulator
when there is interference with the picture or sound
(see below).
1 Switch the video recorder on and make sure
there is no cassette in the video recorder
3 The video recorder will now transmit a test
image on this frequency
2 Press at the same time the
SSTTOOPP
button
hh
on the remote control and the
SSTTOOPP//EEJJEECCTT
button
JJ
on the front of the video recorder
until the modulator frequency of the set
appears in the display (e.g.: M583 for
583 MHz)
4 Use
==PP--
or
;;PP++
to select the option
MODULATOR
7 Leave the on-screen menu with the
MMEENNUU
button
6 Confirm with
OOKK
. In the display there will
briefly appear OK
5 Use
SS++ PP
or
QQSS--
to select the setting
ON (Modulator on) or OFF (Modulator off)
M583
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY
Q583P
MODULATOR ON
EXITPMENU STOREPOK
?