Filter
Top Products
ENGLISH TURBO TIMER-RECORDING
45
45
5 The display shows the programme number to
which the video recorder is currently set,
e.g.: P01. Change if necessary the
displayed programme number with
==PP--
or
;;PP++..
1 Press the
TTUURRBBOO TTIIMMEERR
button on the
remote control.
TTuurrbboo TTiimmeerr--RReeccoorrddiinngg
2 The display shows the actual starting time,
e.g.: 20:00. Change if necessary the
displayed start time with
==PP--
or
;;PP++
FFOORR
EEXXPPEERRTTSS
AAccttiivvaattee VVPPSS//PPDDCC
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled. Use
SSEELLEECCTT
to switch
recognition of these signals on (VPS/PDC appears in
the display) or off.
3 Confirm with
OOKK
4 The display shows a suggestion for the end of
the recording e.g.: 22:00 (Start time + 2
hours). Change if necessary the displayed
finish time with
==PP--
or
;;PP++..
Confirm with
OOKK
P01
ST17:
30
EN19:
30
Using the Turbo Timer, you can make a programmed recording
within the next 24 hours quickly and simply, without having to
switch on the TV set.All you need to do now is enter or confirm
the desired programme number and start and finish time in the
video recorder.
6 Confirm with the
TTUURRBBOO TTIIMMEERR
button.
The display briefly shows OK.
FFOORR
EEXXPPEERRTTSS
SSeelleeccttiinngg tthhee rreeccoorrddiinngg ssppeeeedd
You have the option of two playback and recording speeds:
Standard Play (SP) offers the usual first-class picture quality,
and with Long Play (LP) you can for example (with
somewhat reduced picture quality) record about 360 minutes
on a 180-minute cassette. Use
SSEELLEECCTT
to enter the required
setting.When Long Play is chosen, LP will light up in the
display.